Nissan Sentra Service Manual: Rear axle

Service data and specifications

Wheel Bearing Drive Shaft Drive Shaft Specifications *: Always check with the Parts Department for the latest parts information. Dynamic Damper Specifications ...

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE- ...

Other materials:

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1610 is displayed with other DTC (for BCM or ...

P1715 Input speed sensor
Description ECM receives input speed sensor signal from TCM through CAN communication line. ECM uses this signal for engine control. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1715 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX. If DTC P1715 is displa ...

Main line between dlc and hvac circuit
Diagnosis Procedure 1.Check harness continuity (open circuit) Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Disconnect the following harness connectors. Ecm A/c auto amp. Check the continuity between the data link connector and the a/c ...