Nissan Sentra Service Manual: Removal and installation

Ipdm e/r (intelligent power distribution module engine room)

Ipdm e/r terminal arrangement Note: Numbers preceded by an "f" represent the fuse numbers imprinted on the ipdm e/r. The other numbers represent the fuse numbers as they appear in t ...

Battery

Exploded view Battery frame Battery rods Battery cover Battery bracket Battery tray Battery Front Removal and installation (battery) Removal Loosen the battery terminal nuts ...

Other materials:

Engine assembly CVT
CVT : Exploded View Washer Upper torque rod (RH) Engine mounting insulator (RH) Engine mounting insulator (LH) Rear torque rod bracket Rear torque rod CVT : Removal and Installation WARNING: Situate the vehicle on a flat and solid surface. Place chocks at front and back o ...

Headlamp (lo) circuit
Description The ipdm e/r (intelligent power distribution module engine room) controls the headlamp low relay based on inputs from the bcm over the can communication lines. When the headlamp low relay is energized, power flows through fuses 43 and 44, located in the ipdm e/r. Power then flows ...

Adjustment of steering angle sensor neutral position
Description Refer to the table below to determine if adjustment of steering angle sensor neutral position is required. ×: Required –: Not required Work Procedure ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION CAUTION: To adjust neutral position of steering angle sensor, ...