Nissan Sentra manuals

Nissan Sentra Service Manual: Sunshade

Exploded View


  1. Sunshade
  2. Moonroof unit assembly
  3. Sunshade stopper (LH/RH)

Removal and Installation Front


Removal and Installation

REMOVAL

  1. Remove the headlining. Refer to INT-40, "Removal and Installation".
  2. Remove the sunshade stoppers (1) (LH/RH) from the moonroof unit assembly side rails (2).

: Front



  1. Remove sunshade from rear end of moonroof unit assembly.

INSTALLATION

Installation is in the reverse order of removal.

Moonroof unit assembly
Inspection WIND DEFLECTOR Open glass lid fully Visually check for proper installation, damaged/deteriorated components, or foreign objects within mechanism. Correct as required for smoot ...

Wind deflector
Exploded view Spring Wind deflector Roof panel Sunshade Glass lid Front Removal and installation REMOVAL Open the glass lid. Release the springs (LH/RH), then remove the ...

Other materials:

P0441 EVAP Control system
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0441 is displayed with other DTC such as P2122, P2123, P2127, P2128 or P2138, first perform trouble diagnosis for other DTC. In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. Purge volu ...

P1553 Battery current sensor
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P1553 BAT CURRENT SENSOR (Battery current sensor) The signal voltage transmitted from the sensor to ECM is higher than the amount ...

Preparation
Special Service Tool The actual shape of the tools may differ from those illustrated here. Commercial Service Tool Clip list Descriptions for Clips Replace any clips which are damaged during removal or installation. ...

В© 2014-2025 Copyright www.nisentra.com