Diagnosis procedure
1. Check rear window defogger power supply and ground circuit
Check rear window defogger power supply and ground circuit.
Refer to DEF-32, "Component Function Check".
Is the inspection result normal? YES >> Refer to GI-39, "Intermittent Incident".
NO >> Repair or replace the malfunctioning parts.
Rear window defogger and door mirror defoggers do not operate
Both doors mirror defogger don’t operate but rear window defogger operatesPrecaution for Work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
ID registration cannot be completed
Diagnosis Procedure
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
...
Instrument lower panel lH
Removal and Installation
REMOVAL
Remove the instrument side finisher LH (1) using a suitable tool.
Remove the hood and fuel filler handle assembly from the instrument
lower panel LH. Refer to DLK-191,
"FUEL FILLER OPENER CABLE : Removal and Installation".
Release the ...